+91 97891-43410 , +91 97891-43421

CCNA Training

ccna-training-in-chennai
ccna-training-institute

Cisco Certified Network Associate regularly known as CCNA. It is an IT organize confirmation course offered by Cisco. It is a confirmation program substantial for all kind of designers. It incorporates passage level system engineers, Network Administrators, System Support Engineers and Network Specialists. A web neighborhood comprises of a Computer Network that interconnects PCs inside a restricted zone like office, living arrangement, research facility, and so on. It additionally controls the transmission of information onto the wire.

This region arrange incorporates WAN, WLAN, LAN, SAN, and so on. Among these WAN, LAN and WLAN are most mainstream ones. In this instructional exercise, you will figure out how the neighborhood can be set up utilizing these system framework.

System Interface Card or NIC are printed circuit sheets that are introduced in workstations. It speaks to the physical association between the workstation and system link. A center point broadens the length of a system cabling framework by increasing the flag and afterward re-transmitting it.

In spite of the fact that NIC works at the physical layer of the OSI demonstrate, it is likewise considered as an information connect layer gadget. Some portion of the NIC’s is to encourage data between the workstation and the arrange. During the time spent getting guaranteed you would be barraged with numerous headways of the business in this way expanding your general information.

ccna-online-training-center

Quick Enquiry

Call: +91 97891-43410,
+91 97891-43421

Captcha is not case sensitive.

Testimonial

A center point broadens the length of a system cabling framework by increasing the flag and afterward re-transmitting it. They are fundamentally multiport repeaters and not worried about the information by any stretch of the imagination. The center point associates workstations and sends a transmission to all the associated workstations. During the time spent getting your CCNA accreditation you are certain to build your insight and comprehension of the ideas. Regardless of whether you have forever and a day of involvement in the field, you would expand your insight and abilities. As is commonly said, nothing can supplant certifiable experience, yet books are additionally similarly critical for staying up with the latest with the new progressions in the business. During the time spent getting guaranteed you would be barraged with numerous headways of the business in this way expanding your general information.

CCNA Certification expands your odds of advancement. You could hope to climb in the chain of importance of your association. CCNA declaration is an essential for some other Cisco accreditations. CCNA focus like CCNA Voice, CCNA Security, CCNA Wireless and numerous other expert level confirmations require a legitimate CCNA authentication. Getting a CCNA endorsements summons a specific measure of regard from your partners and business. Some of your partners would have likewise attempted to get affirmed, however couldn’t get ensured. Along these lines, this accomplishment of yours merits a back-tapping.

Hye Infotech provides the best training on CCNA Training in chennai. We arrange classes based on student feasible timings, to take online or classroom trainings in chennai. We are the Best CCNA Training Institute in Chennai as far as CCNA syllabus is concerned.

Course Objective

  • Networking concepts
  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • Explain 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring
  • OSI – Model
  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]
  • TCP/IP Model & Ipv4 Addressing
  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc.
  • Subnetting
  • Default Subnet Mask
  • Describe Class C Subnetting & Practice no. given
  • Describe Class B Subnetting & problems
  • Describe Class A Subnetting & problems
  • Introduction to IPV6
  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Explain how to the Translations between ipV4 and ipV6
  • Basic of Router & Configuration
  • Selection of Router & Cabling a Route
  • When Router used – LAN with WAN connect – to connect networks of different IP
  • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • Explain how to user Cables in different interfaces/purpose of interfaces
  • How to connect WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
  • Different CISCO series – modular/fixed – 10mbps/100 etc
  • Straight through between DTE & DCE
  • Different modes of operation & basic commands
  • Internal Components:
  • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
  • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • DRAM -Running Config
  • NVRAM – Startup Config
  • Flash MEM – IOS
  • Different Modes:
  • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
  • User -Privilege – Global – Sub-configuration mode
  • Syntax/command to switch between modes
  • Assigning IP address for -E0-S0-S1
  • Enabling/disabling – console/privilege / vty password
  • Mold – command
  • Show Config / start / run / version / flash
  • Basic commands practice
  • Changing between modes – (user-privilege- Global-etc)
  • IP address configuration-E0-S0-S1
  • Password – enabling – encrypting it
  • Explain motd, show commands, editing commands
  • Assigning host name (for Router)
  • Advanced Commands
  • Explain the concept of Register value – X2102 – boot field value/purpose ROM monitor made – password breaking
  • 8th/6th/13th
  • bit of register value importance
  • Explain Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting
  • sequence –
  • Backup & Recovery – CDP
  • Practice an above commands as well as following
  • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
  • Clear lines resume
  • Overview of Cisco SDM (Security Device Manager)
  • IP Routing
  • IP Routing, Static Routing & Default Routing
  • IP routing – static routing – default- dynamic routing
  • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
  • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
  • Practical-session for Static & default routing
  • Dynamic Routing and RIP
  • Dynamic Routing – IGP & EGP
  • IGP – RIP-OSPF – EGRP – EIGRP
  • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
  • Role of Routing Protocol – builds/updates/selects & Routes the packet
  • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
  • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
  • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
  • Command – Router RIP Network
  • Sh IP route
  • Timer value for RIP– Update/Invalid/ hold down/flush Timer
  • RIP
  • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
  • Explain Limitations of distance vector algorithm
  • Explain Features of EIGRP and its operations
  • Configuring EIGRP – “Auto-redistribution”
  • Verify and troubleshooting EIGRP
  • Features of OSPF and its operation
  • Configuring single area OSPF
  • Verify and troubleshoot OSPF
  • Access List
  • Purpose/advantage of Access-list
  • IP [-for a host – for a network/sub network].
  • Explain Std IP access-list – wild card calculationv
  • Extd IP access list
  • Switch port ACL
  • Step involved in creating access list
  • Applying access list at the interface – (inbound/outbound)
  • Named access-list for IP
  • Access-list in Telnet sessiont
  • IP standard Access List
  • Practical on
  • IP Std access-list
  • IP Extended Access List
  • IP Extd access-list, named access lists
  • NAT
  • Implement, Verify & Troubleshoot NAT
  • Explain the Basic Operation Of NAT
  • Using (including CLI/SDM)
  • Hands on Practicals Static NAT, Dynamic NAT and PAT
  • Troubleshoot NAT issues
  • WAN Technologies
  • WAN Technologies- Leased Line
  • Leased line
  • P to P communication
  • HDLC & PPP protocol-features
  • Enabling HDLC & PPP
  • PPP Link
  • PPP layer & its explanation/role
  • PAP/CHAP role
  • Configuring PAP/CHAP using commands
  • VPN
  • Describe VPN technology
  • Importance Of VPN
  • Benefits & Role
  • Impact & Components
  • Frame-Relay
  • Packet Switched Network
  • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
  • Enabling Frame-relay
  • Inverse ARP
  • Configuring frame-relay
  • Mesh Network
  • Star Network
  • Combination of above two
  • Switching
  • Switching Operation and Configuration
  • Function –add-learning / Forward-filters the Frame / loop avoidance
  • Redundant path and its problems
  • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
  • Modes of operation of switch/Bridge
  • Port duplexing
  • Switch & hub – half duplex
  • Switch & Server – full duplex
  • CISCO catalyst switch 1912 & 1924 interface details
  • M/K/I modes
  • Basic and advanced commands
  • Enabling & configuring MAC address table
  • VLAN Configuration
  • VLAN – ISL – Trunking
  • Enabling Trunking
  • Assigning VLAN No. & name
  • Configuring ports to a specific VLAN
  • VTP purpose
  • VTP domain
  • VTP modes of operation
  • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
  • Implement Basic Switch Security
  • Wireless LAN
  • Wireless Intro & Operation
  • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
  • Ad-hoc mode, infrastructure mode
  • SSID, BSS, ESS
  • Basic Parameters to configure on a Wireless Network
  • Wireless Security Feature’s (WEP, WPA 1 / 2 )
  • Implementing Wireless Networks

Best CCNA Training:

Contact : + 91 9789143410 / 9789143421

Email : hyeinfotech@gmail.com

CCNA Openings 3-5 years Exp
Company name : Infosys BPM Limited Experience: 2 – 7 yrs Location : Pune Salary: Confidential I Read More..
CCNA Openings 0-3 years Exp
Company name : Essen Vision Software Experience: 1 – 6 yrs Location : Mumbai Salary: Confidenti Read More..
CCNA Job Openings 5-10 years
Company name : Add On IT Systems Experience: 5 – 7 yrs Location : Delhi NCR, Gurgaon Salary: Co Read More..